Portable generators are a wise investment, especially if you live in an area that is prone to hurricanes or blizzards and a whole-home generator is out of your budget. Before you make the investment, there are factors you need to consider to make your investment safer. Plan A Location You need an open area to safely run a generator. Without thorough planning before an emergency, it is easily to make a costly mistake.

The more value you can offer to your customers, the larger your customer base is likely to grow. With nearly 500,000 plug-in electric cars on the road in the United States as of June 2016, that's a rapidly growing customer base you can't afford to overlook. If you want to offer a plug-in charging station in your parking lot, you should talk with a commercial electrician from a company like Craftsman Electric Inc right away.

Although they don't provide the same kind of direct protection that motion sensors do, motion lights require less effort to maintain and will succeed in intimidating all but the most determined burglars. While choosing where to place your motion lights is relatively easy if your front and backyard are almost entirely empty, fences and other kinds of obstacles make your task more difficult. Check out these three common household objects and how to integrate motion lights with them for extra security.

When a power outage occurs, we can typically outlast the issues with some bottled water and dried foods. The tank pets that we take care of do not have the same versatility. Whether it's a fish living in a salt-water tank or a snake ready for its next meal, it's important to have proper back-up solutions for when the power goes out. One of the more ideal options is a standby generator.

If you are redoing your house and looking for a new way to heat your house, there are many different options you can choose from. Two of them are baseboard heating and radiant floor heating.    Baseboard Heating Unlike a forced air furnace, a baseboard heating system doesn't blow air out into your house. Each heating unit is placed along the baseboards just above the floor. They aren't placed on all of the baseboards, but will be on some of the walls.

There are various reasons for a circuit breaker to switch off and cut off power to an electrical circuit. Circuit breakers are designed to shut off power to a line when there is danger of an overload of the circuit or when a irregularity in connectivity is present. Although It may not seem so at the time power is lost, the tripping of a circuit breaker can prevent fires from overheating of electrical wiring and shocks or electrocution from loose wires or improper wiring.

If the lights inside your house are flickering or dimming, even if it's brief or intermittent, it's something you need to be attentive to. There are many reasons for things like this to happen, including some potentially serious electrical issues. If you've seen this type of fluctuation happen more than once, it's time to start narrowing down the source of the problem. Here are a few things to consider. Loose Wiring

It can be both annoying and mildly concerning to have an overhead light fixture that flickers. It can also be easy to ignore if the flickering isn't constant but only happens occasionally. In some cases, a flicker can indicate a major or even dangerous problem. The following guide can help you troubleshoot and determine the cause. Check for external causes first Sometimes the flicker is completely normal. For example, if the flickering or dimming only occurs when the refrigerator compressor or furnace kicks on, then it is simply a momentary lapse in power when the new device began to draw electricity.

With a sudden pop in the middle of the night, the power goes out and you and your family are left in the dark. Even though power outages are a fairly common thing, being stuck in the dark when it happens at night can still be a dangerous thing if you're not careful. If you are stuck in your house with no power in the middle of the night, there are a few simple safety rules to keep in mind that will ensure the safety of your household.

If you own a dishwasher and it has a touch control panel, then you may notice that each touch button has a small light next to it or directly underneath it that lights up when a button is touched. If the light does not light up anymore, you may want to have it replaced. A non-working light will not be able to tell you if that feature of the dishwaser is working or not, nor will it alert you to the fact that you signaled the dishwasher to use that cycle for your dishes.